Yes. We can print double-sided banners.
All of our banners can be produced in a double sided manner. Unfortunately, you cannot order a double sided banner online as we will need additional information about the banner to price it accurately. A double sided banner is typically printed on two layers of vinyl material, with a "blockout" layer between both sides, to prevent the viewer to see through to the other side. We also offer double-sided banners that can be printed utilizing the back and front of one piece of vinyl, but again, pricing can only be obtained by calling a banner specialist during our operating hours.
When ordering a two sided banner, the installation of the banner becomes very important. Since two-sided banners are seen from both sides the banner is usually stretched between poles or hung from a guide wire. When hanging the banner from a guide wire, we usually add grommets to the top of the banner, so that snap hooks can be used to secure the banner through the grommets and onto the guide wire. This installation method is similar to a bathroom shower curtain. Bottom grommets are usually placed in the lower corners of the banner and a rope is attached to these grommets to "anchor" the banner by tying off the corners to prevent the banner from sliding or bunching.
When a banner is installed by suspending it between two poles, we usually recommend, that we stitch a rope along the length of the top edge of the banner and extend the rope past the edge of the banner to the poles. The banner then can be tied to the poles using the rope. When tightened, the rope is pulling on the rope rather than pulling on the banner. Keeping a banner taut requires a strong pull. This method of banner installation is much better than attempting to tie a rope through the grommets of the banner which will probably result in tearing the grommets out of the banner.